Chapter 5: User Interface
SolarEdge Installation Guide - MAN-01-00060-2.6
42
Status fan status - Three-phase UPS
This window applies to three-phase inverter and provides information on the state of external and internal fans of the
inverter:
FAN 1: E npanne FAN 2: E nfonct.
Each fan can have one of the following statuses:
•
Tbd .:
OK Fan.
Tbd .:
OK Fan.
•
Out of order:
this status will indicate a system error and not necessarily a faulty fan. Sauté the AC circuit
Out of order:
this status will indicate a system error and not necessarily a faulty fan. Sauté the AC circuit
breaker and restart it can clear this status. If the state does not change, replace the fan. For more information, see
Fan
breaker and restart it can clear this status. If the state does not change, replace the fan. For more information, see
Fan
replacement 2
on page 75.
replacement 2
on page 75.
power control status
1
power control status
1
PWRCTRL:
ADISTANCE
PWRL mimics:
1 0. 0 4 W k
C P bone hi:
0. 9
P roduction:
7 0 0 0 W
•
PWR CTRL:
power control status:
PWR CTRL:
power control status:
•
REMOTE -
Communication with RRCR or intelligent energy manager is confirmed / validated.
REMOTE -
Communication with RRCR or intelligent energy manager is confirmed / validated.
REMOTE -
Communication with RRCR or intelligent energy manager is confirmed / validated.
•
LOCAL
- The power is controlled locally (eg, by a fixed limit.), This inverter or limits the production of PV
LOCAL
- The power is controlled locally (eg, by a fixed limit.), This inverter or limits the production of PV
energy to its share of the limit of the feed energy, resulting from the loss of communication with the
manager smart energy. If this status appears, check the communication with the intelligent energy manager
or the communication with the meter.
•
PWR Limit:
the maximum energy output of the inverter is defined by one of the energy limit options:
PWR Limit:
the maximum energy output of the inverter is defined by one of the energy limit options:
•
RRCR
•
Intelligent power management (power limit)
•
P (f)
•
Q (U)
•
Cos Phi:
The ratio between the active power and reactive
Cos Phi:
The ratio between the active power and reactive
•
Production:
The energy produced by the inverter
Production:
The energy produced by the inverter
For more information, refer to the following application notes:
•
Note application of energy control,
available on the website of SolarEdge
Note application of energy control,
available on the website of SolarEdge
http://www.solaredge.com/files/pdfs/application_note_power_control_configuration.pdf
•
Application Note on the power limit,
available on the website of SolarEdge to
Application Note on the power limit,
available on the website of SolarEdge to
http://www.solaredge.com/files/pdfs/products/feed-in_limitation_application_note.pdf.
1
Available on the version of the firmware 2.7xx / 3.7xx and superior communication card (CPU).
1
Available on the version of the firmware 2.7xx / 3.7xx and superior communication card (CPU).
