Chapter 3: Installation of the inverter
SolarEdge Installation Guide - MAN-01-00060-2.6
18
•
ON / OFF switch:
turn the switch ON position initiates the operation of the power optimizers and allows the inverter
ON / OFF switch:
turn the switch ON position initiates the operation of the power optimizers and allows the inverter
to start exporting energy to the power grid. The closure of the switch reduces the voltage of the power optimizer to a
low intensity safety voltage and prevents the export of energy. When this switch is off, the inverter control circuit
remains energized.
•
LCD light button:
press this button lights up the LCD for 30 seconds. Also, you can press this button to access
LCD light button:
press this button lights up the LCD for 30 seconds. Also, you can press this button to access
the options in the setup menu, as described on page 32.
•
Two
communication cable glands,
with a diameter of 20 mm each for the connection of communication options of
Two
communication cable glands,
with a diameter of 20 mm each for the connection of communication options of
Two
communication cable glands,
with a diameter of 20 mm each for the connection of communication options of
the inverter. Each gland has three openings. refer to the
Chapter 6: Communication Setup
on page 43 for more
the inverter. Each gland has three openings. refer to the
Chapter 6: Communication Setup
on page 43 for more
the inverter. Each gland has three openings. refer to the
Chapter 6: Communication Setup
on page 43 for more
Mounting the Inverter
The inverter is provided with one of two types of mounting bracket. The assembly steps in the
following sections refer to these types of media
Figure 5: Mounting Media Types
NOTE:
Make sure the surface or the mounting structure can support the weight of the inverter and fastening.
1
Determine the mounting location of the inverter on a wall or on a pole, as follows:
1
Determine the mounting location of the inverter on a wall or on a pole, as follows:
•
To allow for heat dissipation, keep sufficient space between the UPS and other objects:
•
20 cm / 8 "at the top and the bottom of the inverter
•
10 cm / 4 "to the right and to the left of the inverter
WARNING :
HEAVY OBJECT. The weight of the single-phase inverter 20-21 kg and 33 kg three-phase inverter. To avoid muscle tear or injury in the back, use
proper lifting techniques, and if necessary - a lifting aid LTo remove or replace the inverter.
Type 1
Type 2
