SolarEdge PV 60MMJ Series, Руководство по установке, Страница: 6 / 24

Installation Safety
NOTE
Wear protective head gear, insulating gloves, safety shoes, and insulated
tools when installing the modules.
Do not install the modules in rain, snow, or otherwise wet or windy
conditions.
Modules may be covered with an opaque material during module
installation and wiring to reduce risk of charge buildup and electrical
shocks or burns.
When mating connectors, make sure they are firmly connected.
Due to the risk of electrical shock, do not perform any work if the
junction box is wet.
Do not touch the junction box and the end of output connectors with
bare hands.
Do not unplug the connectors under laod.
It is recommended not to work alone.
Wear a safety belt if working far above the ground.
Do not wear metallic jewelry, which can cause electric shock, while
installing or troubleshooting the PV system.
Follow the safety regulations for any and all other system components,
including wires, connectors, charging regulators, batteries, inverters, etc.
The cables must be protected from direct sunlight and away from areas
of water collection.
Do not damage the surrounding modules or mounting structure when
replacing a module.
Do not change any module components (diode, junction box, plug
connectors, etc.).
Important Safety Instructions 5
Smart Modules Installation Guide
MAN-01-00520-1.3