SolarEdge PV 60MMJ Series, Руководство по установке, Страница: 14 / 24

Clamping the Smart Half-cut Cell Mono PERC Module
Modules can be laid on rails, either on the long side of the frame (See Figure
6
).
Figure 6: Connecting the SPVxxx-R60LWMG
/SPVxxx-R60LBMG
Modules by clamps to a frame
Attach each aluminum mounting clamp with an M8 (5/16") bolt, nut. Tightening
torque should be within 17~23 Nm (12.5~17.0 ft-lbs) coarse thread bolts. Secure
each clamp by attaching a plain washer, spring washer, and nut, in that order.
Figure 7: Attaching mounting clamp
Ensure the clamps overlap the module frame by at least 5 mm (0.2 in)
Ensure the clamps overlap length is at least 40 mm (1.57 in)
Ensure the clamp’s thickness is at least 3 mm (0.12 in)
NOTE
For configurations where the mounting rails run parallel to the frame,
precautions should be taken to ensure the bottom flange of the module frame
overlaps the rail by 15 mm (0.59 in) or more.
Chapter 2: Mechanical Installation 13
Smart Modules Installation Guide
MAN-01-00520-1.3