SolarEdge Firefighter Gateway, Руководство по установке, Страница: 12 / 61

LCD and LCD-Menu Buttons
The LCD screen displays status information of the system and various menus for
configuration options. The LCD panel and buttons are used during the following
processes:
Operational mode: The LCD panel allows checking for proper system operation.
Refer to
Status Screens - Operational Mode on page 29 for a description of this
option.
Setup mode: Upon installation, an installer may perform basic configurationas
described in Configuration Menu Options on page 33.
Error messages: In the event of a problem, an error message may be displayed on
the LCD panel.
For more information, refer to
Errors and Troubleshooting on page 56.
Use the four user buttons to control the LCD panel menus:
Esc : Moves the cursor (>) to the beginning of the currently displayed parameter;
goes to the previous menu, and cancels a value change with a long press (until
Aborted is displayed).
Up (1) and Down (2): Moves the cursor from one menu option to another, moves
among the characters of a displayed parameter, and toggles between possible
characters when setting a value.
: Selects a menu option and accepts a value change with a long press (until Applied
is displayed).
Communication Connectors
Antenna1: used for optional wireless ZigBee or Wi-Fi antenna connection (refer to
Additional Connection Options on page 28.
RS485-1 and RS485-2: used for connecting external devices to the gateway (refer
to
Connecting the Firefighter Gateway to the Installation on page 18).
Ethernet: enables connecting the SolarEdge gateway to the SolarEdge monitoring
platform through an Ethernet switch/router (refer to
Creating an Ethernet (LAN)
Connection on page 24). The Ethernet switch/router should be connected to the
Internet.
Firefighter Gateway Installation Guide MAN-01-00113-1.4
12 LCD and LCD-Menu Buttons