SolarEdge Critical Power B300, Руководство пользователя

Страница: 45 / 152

45 UPS for 400 Vac Grid, User Guide, doc. rev. 4
Figure 29: Setup > Shutdown and Autorestart

You can set a specific limit to the duration of battery mode, after which time the UPS will
automatically turn itself off.

You can instruct the UPS to continue to supply backup power until the battery voltage
descends to the predefined level at which the UPS will turn itself off.
In this screen, you also specify if the UPS should automatically turn itself back on when the AC
mains power returns following a prolonged power failure, or if it should remain off.
8.2.1.5.
Setup > System > Controller
This submenu contains functions related to the system controller.
8.2.1.5.1. Internal adaptor status
For use by technician only. Displays the data being passed to and from the adaptor card, PC1710,
part of the controller module.
8.2.1.5.2. Audio test
Tests the audible alarm.
8.2.1.5.3. Screen saver setup
Enables/disables the LCD panel’s screen saver.
8.2.1.6.
Setup > System > Maintenance
This option has a number of sub-options. Some are related to system maintenance and some to
the system log.