SolarEdge Cellular Plug-In, Руководство по установке

Страница: 17 / 23

Verifying and Viewing Communication Status
You can view error messages on the SetApp Status page.
To access the SetApp Status screen:
1. Perform one of the following steps:
During first time commissioning and configuration: From the Commissioning
menu select Status . The main inverter Status screen is displayed.
If the inverter has already been activated and commissioned - open SetApp and
follow the instructions on the screen (scan the inverter bar-code; move the
ON/OFF/P switch to P position (for less than 5 sec) and release. Your smart
phone creates a Wi-Fi connection with the inverter and displays the inverter
main Status screen.
2. Scroll down to the Server Comm. section, and verify that S_OK (inverter successfully
established a connection with the monitoring platform) and Cell (the method of
communication with the SolarEdge monitoring platform) appear on the Status
screen.
3. If required, you can view the:
Mobile Network Operator name (MNO) on the Communication menu.
The Signal strength received from the Cellular Plug-in is displayed on the Status
screen, in the form of bars, rising from left to right. The more bars that appear,
the stronger the signal.
Viewing Error Messages and Troubleshooting
The Inverter is not Starting Up
If the inverter is not starting up, the Plug-in may have been installed in an inverter with
an incompatible CPU software version.
If the Plug-in is installed, remove it and upgrade the inverter as described in the section
Software Requirements on page 8.
Cellular Plug-in Installation Guide
16 Verifying and Viewing Communication Status