Solarbotics K SV-ATMEL, Руководство пользователя, Страница: 11 / 16

Step 18, 19
The ATMega8L Brainboard
Step 18 - Short Expansion Port Headers:
expansion board immediately, it’s best to install the headers now so they don’t
get lost. Install them on the
top-side in Expansion 1 and Expansion 2 spots.
These headers are special in that they’re short, specially selected to mate with
short-pins on the expansion breadboard.
Although you may not use an
Short
5-Pin
Header Short
11-Pin
Header
Step 19 - Install Atmel ATMega8L - This is a static-sensitive part, so if you
frequently “zap” people, you’ll have to be careful. Do this near a sink, and touch
the metal faucet just before doing this, as it will remove any static charge.
Insert the Atmel microcontroller. Note that the notch on the end of the chip
must match the notch on the PCB, which is on the left side.
As the chip has legs that splay out a bit, you might want to bend the legs inward
so it fits into the chip carrier easier.
(repeat for each side)
...ends like
this!
Gently bend all the chip
pins inwards.
Starts like
this...
Note Chip Notch
Position
Note:
We’re working
on the top again!
Regular 5-Pin
Socket
Short 5-Pin
Socket
Short 11-Pin
Socket
10-Pin
Header