|
11
January 2020
|
Solar Stik
®
, Inc.
Operator and Maintenance Manual for PRO-Verter RMK LAN
Fault Codes and Inverter Status Codes
Data files contain Inverter Fault and Status Codes along with all of the other parameters from
the RMK. The table below is the key for the Fault and Status Codes.
Note:
The “FAULT” column
(Column T) in log files extracted from the RMK include fault codes not listed below. If fault codes
other than those shown below are reported by the RMK User Interface or encountered when
searching the log files, please contact Solar Stik Technical Support.
Table 1. Inverter Fault and Status Codes
Note:
Fault codes ranging from 250-
255 may indicate that the RMK has been
connected incorrectly. Check/ensure that
all of the connections and cable types are
correct.
