Solar-Log 1200 Скачать руководство пользователя страница 65

Страница: 65 / 158

Operating the Solar-Log 1200 and 2000 via Touch Display

4.4 Accessing Forecast

Swipe in the

Power

menu to go to the forecast.

Fig.: Forecast view

In the forecast view, weather data is accessed in 60-minute intervals and based on this data, the values for

the current day and the next two days is calculated and shaded in gray.

This is automatically asked with the Classic 2nd Edition. This has to be entered in the inverter details with

the Commercial Edition.

Note

It is required to be registered and logged into our portal Classic 2nd or Commer-

cial Edition to display the forecast on the Solar-Log™ .

Note

Plant location and the alignment and inclination of the module need to be config-

ured in the portal to receive daily weather updates.

The weather data is transfer to the Solar-Log™ in the morning and in the evening.

Содержание 1200































































































































































Результаты поиска

Содержание 1200

Отзывы:

Solar-Log 1200, Руководство пользователя, Страница: 65 / 158

Результаты поиска

Содержание 1200

Отзывы: