Solahart 270HAV Скачать руководство пользователя

Страница: 26 / 52

DISPLAY PANEL

•

Method 2

–

Setting the finish date of the Vacation period,

the heat pump must be “Off” at the Display Panel.

◼

Press the “On/Off” key for 2 to 3 seconds to turn the heat pump “Off” at the Display Panel.

‘OFF’ illuminates in the Main Display Area.

◼

Press the

“Vacation” key.

The “Vacation” key illuminates red and the “Vacation” display icon illuminates blue.

The “Standard Heating” key illuminates blue.

The Timer

’ON’ icon illuminates.

The month digits commence to flash.
(the month and day are displayed numerically in the Time / Date Display Area).

◼

Press the “Up” key or "Down" key to select the month digits of the Vacation finish period.

◼

Press the "Vacation" key to save the month digits.

The day digits commence to flash.

◼

Press the "Up" key or "Down" key to select the day of the Vacation finish period.

◼

Press the "Vacation" key to save the day digits.

The last two digits of the year commence to flash.

◼

Press the "Up" key or "Down" key to select the year of the Vacation finish period.

◼

Press the "Vacation" key to save the year digits.

◼

The Vacation finish date of the Vacation Mode is now set.

The heat pump remains “Off” at the Display Panel.

The Timer

’ON’ icon remains illuminated and the month and day of the finish date illuminate.

The “Vacation” key remains illuminated red and the “Vacation” display icon remains illuminated blue.

◼

The heat pump will turn “On” at the Display Panel at midnight on the morning of the finish date, or
when power is available to the water heater if connected to a time controlled electricity supply.

◼

When you leave for ‘Vacation’ and if the heat pump had been tuned back “On” at the Display Panel
after setting the finish date, it is necessary

to turn the heat pump “Off” at the Display Panel.

➢

Press the “On/Off” key for 2 to 3 seconds to turn the heat pump “Off” at the Display Panel.

‘OFF’ illuminates in the Main Display Area.

The Timer

’ON’ icon and the month and day of the Vacation finish date remain illuminated.

Ensure the “Vacation” key is illuminated red.

Содержание 270HAV





















































Результаты поиска

Содержание 270HAV

Отзывы:

Похожие инструкции для 270HAV

Бренды по названию

Популярные бренды

Solahart 270HAV, Руководство пользователя и инструкции по установке

Результаты поиска

Содержание 270HAV

Отзывы:

Похожие инструкции для 270HAV

Бренды по названию

Популярные бренды