EN
on, indicating that the steam cleaner is recov-
ering the necessary pressure.
•
-
peatedly for short bursts rather than just a
few times for longer periods, so as to maintain
pressure in the reservoir.
•
-
nect the device from the mains, wait for it to
cool down to remove the attachments.
ATTACHMENTS
•
lining up the lugs on the taper nozzle with the
•
•
If you want to reach inaccessible places or the
-
ible hose.
•
•
Fit any of the accessories accompanying the
•
-
dows, furniture, sofas, fabrics, and so on.
•
delicate surfaces as sofas and armchairs.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
•
Unplug the appliance to the mains.
•
Leave the appliance to cool down.
•
Empty the water out of the boiler. Make sure
the appliance is completely depressurized be-
fore opening of the safety cap.
CLEANING
•
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
•
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
•
Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
•
Never submerge the appliance in water or any
other liquid or place it under running water.
TATIONS:
•
For the appliance to work correctly it should be
kept free of limescale or magnesium incrusta-
tions caused by the use of hard water.
•
Check that appliance has cooled down (wait
at least 3 hours after disconnecting the appli-
•
Does not force open the safety cap; make sure
the appliance is completely depressurized pri-
or to opening.
•
Fill the boiler with water and add the selected
anti-lime scale product.
•
Leave the product to
•
Shake vigorously and empty fully.
•
If necessary repeat this procedure.
