SOLAC HU1065, Инструкция по эксплуатации

Страница: 11 / 72

EN
•
Add cold water (18-22ºC) without filling it com-
pletely. Maximum capacity: 1.8 l. approx.
•
Put the cover back and turn it clockwise. Be
sure that it is closed firmly.
•
Turn the tank back over and place it on the
base while making sure that it is seated cor-
rectly.
•
When placing the water tank (5) back on the
base, some of the water it contains enters the
base (8); this is part of the normal operation of
the appliance and does not entail any risk.
•
If you wish to use an aroma essence pour a
few drops (3 -5) into the aroma compartment
(10).
•
Plug the humidifier into the mains.
•
Press mist regulator button (1) and a green in-
dicator light will come on.
•
Choose the flow of steam desired by pressing
the button (1). Theres are two intensity levels.
1st press: High Intensity
2nd press: Low Intensity
3rd press: Off
•
We recommend you start with a low flow to
avoid condensation and increase this if nec-
essary.
•
If there is insufficient water in the tank, the
green pilot light of the mist level will flash three
times with a beep and the humidifier will turn
off. Before turning the device back on, it will be
necessary to refill the tank with water.
•
When you want to stop the appliance from
emitting steam, press the mist regulator button
(1) several times (High, Low, Off) till it goes off.
•
Unplug the humidifier from the mains socket
and empty the water tank and interior tank.
LIGHT FUNCTION
•
The device can work as a humidifier, as a lamp
or as a humidifier and lamp at the same time.
•
The lamp function can be selected through the
device or through the remote control.
•
Select the desired light intensity, from highest
to lowest intensity, by pressing the button (2)
of the appliance or the button (c) of the remote
control.
REMOTE CONTROL:
a) On / Off button. Press-
ing once turns on and
selects the highest mist
and lighting levels. When
pressing again, the device
switches off.
b) Mist regulator button (2 levels): Choose the
flow of steam desired by pressing the button.
1st press: High Intensity
2nd press: Low Intensity
3rd press: Off
c) Light intensity regulator button. 3 levels: High,
Medium, Low.
d) Mist timer to turn off the nebulizer automatical-
ly after a specific time interval (1, 2 or 4 hours).
e) Led light timer to switch off the light auto-
matically after a specific time interval (1, 2 or 4
hours).
TIMER FUNCTION
•
The operating time of the mist and light of the
device can be controlled.
•
Mist timer: This works with the mist function
turned on and by pressing the button (3) on
the appliance or the button (d) on the remote
control.
1st press: 1 working hour
2nd press: 2 working hours
3rd press: 4 working hours
4th press: Time is cancelled
•
Led light timer: This works with the lighting
on and by pressing the button (e) on the re-
mote control.
1st press: 1 working hour
2nd press: 2 working hours
3rd press: 4 working hours
4th press: Time is cancelled
•
The selection made will be reflected in the hu-
midifier by a green indicator light that changes
position according to the chosen option.
CLEANING
•
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
•
Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQ-
UID.
•
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
•
Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
•
Never submerge the appliance in water or any
other liquid or place it under running water.
•
Never submerge the connector in water or any
other liquid or place it under running water.
b
d
c
e
a