background image

Firmenanschrift aufbewahren - 

Keep the address of the company - 

Veuillez conserver l'adresse - 

Adres bewaren - 

Nicht geeignet für Kinder unter 3 Jahren! - Verschluckbare 

Kleinteile! 

Not suitable for children under 3 years! - 

Contains small parts! 

Ne convient pas pour les enfants de moins 

de trois ans! - Contient de petites pièces pouvant être absorbées! 

Niet 

geschikt voor kinderen beneden 3 jaar! - Kleine onderdelen Kunnen worden ingeslikt!

Tel.: +49 (0)7502 - 94115-0 - Fax: +49 (0)7502 - 94115-99

[email protected] - 

www.sol-expert-group.de

SOL-EXPERT group

, C.Repky - Mehlisstrasse 19 - D-88255 Baindt

SOL-EXPERT

group

group

No. 

76336

MADE IN EUROPE

10+

Return the device 
to a certified provider at 
the end of its useful life!

Generally: 

Please return the circuit board to a certified provider at the end of its useful life. These will then ensure it is disposed of in 

compliance with directives. This is good for the environment and an important part of actively protecting the environment.

ENVIRONMENTAL NOTES

The 'Blinking Heart' soldering kit

The 'Blinking Heart' soldering kit is excellent to practice soldering on a 
circuit board. Over 30 parts are soldered onto the circuit board step by 
step according to the instructions. Once the kit is assembled the heart 
can be operated in steady or blinking mode.
In blinking mode you can then also adjust the blink speed via the 
potentiometer. So you can send messages, e.g. slow blinking: I love you - rapid blinking: I really love you!

Decorate the included plywood front any way you'd like and install if desired. Dimensions: 70 x 70 mm, over 30 parts.
The 'Blinking Heart' electronics building kit is powered via power bank or via USB port. This eliminates costly batteries.

Qty.

Part

Value/Description

1

Circuit board

76320

20

LED 5 mm  

Colour red

2

Resistor  (R5/R6)

3K9 Ohm

2

Resistor  (R1/R4)

56 Ohm

1

Resistor  (R7)

620 Ohm

2

Capacitor (C1/(C2)

47 uF/10V

2

Transistor (T1/T2)

BC547B 

1

Switch (SW1)

SS12D01

1

Pot (R2)

100K ohm

1

USB connector

installed

Front panel

1-pc.

 
Heart with blinking or steady lights 
soldering kit, 

powered via power bank 

or USB port

Parts list

    Check and sort out parts

BC547B

You will also need:

Soldering iron, solder, wire cutters, tweezers, power bank 
or USB port

47 uF

Recommendation for children 
and teenagers: 

Assembly and 

soldering should be supervised 
by an adult.

4 037373 763368

IMPORTANT SAFETY NOTES

Keep this manual for future reference! It contains important information.
This kit is intended for USB power only.

The soldering iron, solder and the parts being soldered become very hot. Be very careful!
Always use a mat when soldering! This prevents parts and the circuit board from slipping.
We recommend using a soldering iron holder to set the soldering iron down safely during use.

 Never connect the kit to 230 V mains voltage! 

Acute danger to life!

QR Codes

Cliquez ici pour les instructions:

Klik hier voor de instructies:

https://www.sol-
expert-group.de/All-
about-soldering/Smart-kits-for-
soldering/Solder-kit-heart-with-flashing-
function-and-permanent-
light::1263.html?language=en

https://www.sol-
expert-
group.de/Rond-solderen/Clever-kits-voor-het-
solderen/Soldeerkit-hart-met-knipperende-functie-
en-permanent-licht::1263.html?language=nl

Click here for the instructions:

Hier geht es zur Anleitung:

https://www.sol
-expert-
group.de/Rund-ums-Loeten/Pfiffige-
Loetbausaetze/Loetbausatz-Herz-mit-
Blinkfunktion-und-
Dauerleuchten::1263.html?language=de

https://www.sol-
expert-
group.de/Autour-de-la-soudure/Kits-
astucieux-pour-la-soudure/Coeur-de-kit-de-
soudure-avec-fonction-clignotante-et-
lumiere-permanente::1263.html?language=fr

Conrad No.

1818582

Содержание 76336

Страница 1: ...s Qty Part Value Description 1 Circuit board 76320 20 LED 5 mm Colour red 2 Resistor R5 R6 3K9 Ohm 2 Resistor R1 R4 56 Ohm 1 Resistor R7 620 Ohm 2 Capacitor C1 C2 47 uF 10V 2 Transistor T1 T2 BC547B 1 Switch SW1 SS12D01 1 Pot R2 100K ohm 1 USB connector installed 1 Front panel 1 pc Heart with blinking or steady lights soldering kit powered via power bank or USB port Parts list Check and sort out p...

Страница 2: ...n place Bend the middle leg of the transistor slightly to the back 2 Pay attention to the direction 1 Solder 2 capacitors in place Pay attention to the polarity flat side rounded side Transistor top view 1 flat side rounded side Transistor side view bend middle leg to the back 2 Parts needed 47 uF 2 x 47 uF IMPORTANT Imprint The longer leg is C Parts needed Trim excess wires B After soldering use ...

Страница 3: ...vertical After choosing the correct position you can solder the USB connector in place First slightly solder in one area adjust the USB connector if crooked then solder on the other 3 areas Once all 4 points have been soldered the USB will then be firmly attached F G H I USB connector position for horizontal USB port USB connector position for vertical USB port horizontal USB port vertical USB por...

Страница 4: ...he setting they will either be steady or blink You can use a small screwdriver to adjust the speed on the potentiometer Slide the front panel over the LEDs using a little pressure If necessary adjust the LEDs L ATTENTION the soldered on LEDs must be flat on the board When soldering make sure the legs do not short circuit A short circuit is caused by e g accidentally soldering together 2 wires with...

Отзывы: