16
5. BASIC OPERATION
Learn basic key operations here before you read each measurement procedure.
Power ON/OFF
Lighting up the reticle/keys and selecting screen backlight brightness
Brightness level: "19.7 Instrument Conditions - Instrument"
Switching to Starkey mode
Switching to Program mode
• Do not switch between modes by
{PRG}
or not turn OFF the power just after pressing
{PRG}
(when a
program is activated or quit).
Switching the Laser-pointer/Guide light ON/OFF
"Switching
{
}
function: 19.7 Instrument Conditions - Instrument"
• Changes can also be made by tapping the icon on Status icon or in Starkey mode.
"5.2 Display Functions Status icons", "5.4 Starkey Mode"
5.1
Basic Key Operation
{
}
Switches the reticle illumination and key light On/Off (When Key light is
On, backlight brigthtness goes down)
{
★
}
Switches to Starkey mode/previous screen
{PRG}
Switches to Program mode/Basic mode
{
}
(Press and hold until a
beep sounds
)
Turn ON/OFF the laser-pointer/guide light
Display unit
Program mode
Starkey mode
Illumination
Switching input mode
Luminance sensor
{
}
{ }
PRG
{ }
{ }
Enter
}
{ }
B.S.
{
to
{ESC}
{ }