manualshive.com logo in svg

Sokkia im-101, Руководство оператора, Страница: 193 / 230

Поделиться
Скачать
Sokkia im-101 Скачать руководство пользователя страница 193

187

33. CHANGING THE SETTINGS

Select "Inst. Config" in Config mode and select "Unit".

Items set and options (*: Factory setting)

Temp. (Temperature)

:

°

C*, 

°

F

Press

: hPa*, mmHg, inchHg

Angle

: degree*, gon, mil

Dist

: meter*, feet, inch

Feet (only displayed when "feet" or "inch" selected above):

Int. feet* (1 m = 3.280839895)
US feet   (1 m = 3.280833333)

Inch (Fraction of an inch)

“Fraction of an inch” is the unit used in the United States and expressed like the following example.

• Even if “inch” is selected in this setting, all the data including the result of area calculation are output in “feet” 

and all the distance values must be input in “feet”. In addition, when the “inch” display exceeds the range, it 
is displayed in “feet”.

 International feet and US survey feet

The iM can display feet values in International feet and US survey feet units.
International feet, the standard feet units, are referred to simply as “feet” elsewhere in this manual.
US survey feet are units used in surveys by the U.S. Coast and Geodetic Survey and are referred to as 
“US feet” in this manual.
When “feet” or “inch” is selected in “Dist”, the “Feet” item will appear on the screen as below. When “meter” 
is selected, this item will not be displayed.

Results displayed in feet will differ according to the unit selected in this item.

33.8 Instrument Conditions - Unit

Instr.config

Power supply
Instrument

Unit

Password

Date and time

F e e t

I n t .   f e e t

f e e t

Содержание im-101







































































































































































































































Отзывы:

Нет отзывов