manualshive.com logo in svg

Sokkia im-101, Руководство оператора, Страница: 188 / 230

Поделиться
Скачать
Sokkia im-101 Скачать руководство пользователя страница 188

182

33. CHANGING THE SETTINGS

 Dist.reso. (Distance resolution)

Select distance resolution of fine measurement. Distance resolution of rapid and tracking measurement 
will shift with this setting.

 Tracking reso. (Tracking resolution)

Select distance resolution of tracking measurement and road measurement (N-prism only). Set this setting 
depending on the measurement purpose like measuring a moving target.

EDM ALC

Set the light receiving status of the EDM. While carrying out continuous measurement, set this item 
according to the measurement conditions.

• When EDM ALC is set to "Free" the instrument’s ALC will be automatically adjusted if an error occurs as 

a result of the amount of light received. Set to "Free" when the target is moved during measurement or 
different targets are used.

• When "Hold" is set, the amount of light received will not be adjusted until initial adjustment has been 

performed and continuous measurement completed.

• Try setting to "Hold" when the light beam used for measurement is stable but is frequently obstructed by 

obstacles such as people, cars, or tree branches etc. preventing measurement from being performed.

• When the distance measurement mode is set to "Tracking" (target is moving during distance 

measurement), the distance will be measured in "Free" status regardless of the EDM ALC setting.

Select "Obs.condition" in Config mode and select "Reflector".

Items set and options (*: Factory setting)

Reflector

: Prism*, Sheet, N-prism (reflectorless)

Sheet mode

: On*, Off

PC (Prism constant)

: -99 to 99 mm ("Prism" is selected: 0*, "Sheet" is selected: 0*)

• Above-described input ranges are the ranges when 1 mm is selected in "Dist.reso". When 0.1 mm is 

selected, values can be input to the first decimal place.

Sheet mode (Selecting target)

Target can be changed by selecting an option in "Reflector" in the Obs. condition, or by pressing

{SHIFT}

 in the screen where the target symbol is displayed. The selection items can be preset to "Prism/

Sheet/N-prism (reflectorless)" or "Prism/N-prism (reflectorless)".

Prism constant correction

Reflective prisms each have their prism constant.
Set the prism constant correction value of the reflective prism you are using. When selecting "N-prism 
(Reflectorless)" in "Reflector", prism constant correction value is set to "0" automatically.

33.3 Observation Conditions - Reflector (Target)

Obs.condition

Angle/Tilt
Dist

Reflector

Atoms

Other

R e f l e c t o r

P C

   : 

Prism

   :     0

Sheet mode

     : On

Содержание im-101







































































































































































































































Отзывы:

Нет отзывов