Sokkia GSR2700 ISX, Руководство по эксплуатации

Страница: 47 / 106

Chapter 5
GSR2700 ISX Operations Manual 37
System Setup
Setting up the GSR2700 ISX is a straightforward process, whether
you are in the field (collecting data) or at the office (configuring
the receiver or transferring collected data to your PC for post-
processing). This chapter summarizes typical receiver operations,
as well as system setup for both the office and field operations.
5.1 Operation Overview
The following list outlines the general sequence of operations
when using the GSR2700 ISX receiver:
1. Supply power to the GSR2700 ISX, using charged internal
batteries or a connection to an external power supply.
2. Press the power button. The receiver will turn on, acquire
and track satellites, and issue a “Receiver Ready” message
(or matching sound) once it completes the initialization.
Typically, the GSR2700 ISX will then operate based on the
Factory POWERUP option selected for the receiver.
NOTE The receiver comes with five default POWERUP configurations,
and a None setting. These settings can be selected using the
GSR2700 IS/ISX Config Tool software (for more information,
see Chapter 1, Finding More Information , page 8 and
Chapter 7, Collecting Data , page 53).
3. If you plan to use the GSR2700 ISX to configure the receiver
or to control the survey, connect a data collector. (A data
collector is not always necessary; for example, if you are
using the receiver as an RTK base or in a static survey).
CAUTION
For a list of items you should be aware of as
you set up and use the GSR2700 ISX, see
Section 1.5,
Usage Cautions , page 6.