Sokkia GSR2700 IS, Инструкции по эксплуатации, Страница: 34 / 87

GSR2700 IS Operations Manual 23
Display Panel Operations Chapter 3
• Wireless communication status (Section 3.2.3, Wireless
communication status , page 25)
• Internal radio status (Section 3.2.4, Internal radio status ,
page 26)
3.2.1 Receiver health
The receiver health indicator displays the current status of
the receiver.
Under normal operation, neither LED is illuminated. When there
is a warning or error condition, the LEDs illuminate in a sequence
of six flashes. If the first flash in the sequence is yellow, it is a
warning condition; if red, it is an error condition. The particular
combination of red and yellow flashes indicates a specific
warning or error condition (for example, the receiver is being
operated outside its temperature range).
If an error condition persists, take the following steps:
1. Turn the receiver off for a few minutes.
2. Perform a factory reset (see Table 5, Power Button Functions ,
page 21).
3. If the error condition still persists, check to see if the receiver
is too hot. If it is, let it cool down and perform another factory
reset.
4. If the error condition is not resolved, contact your local
Sokkia distributor.
NOTE Make note of the sequence of flashes and provide this
information to your Sokkia distributor, to assist in identifying the
problem.