Sokkia CX-101, Руководство по обслуживанию, Страница: 20 / 322

10
3. LASER SAFETY INFORMATION
CX is classified as the following class of Laser Product according to IEC Standard
Publication 60825-1 Ed.2.0: 2007 and United States Government Code of
Federal Regulation FDA CDRH 21CFR Part 1040.10 and 1040.11 (Complies with
FDA performance standards for laser products except for deviations pursuant to
Laser Notice No.50, dated June 24, 2007.)
• EDM device in objective lens: Class 3 Laser Product (Class 1 Laser Product
when prism or reflective sheet is selected in Config mode as target)
• Laser plummet ( ): Class 2 Laser Product

• EDM device is classified as Class 3R Laser Product when reflectorless
measurement is selected. When the prism or reflective sheet is selected in
Config mode as target, the output is equivalent to the safer class 1.

Warning
• Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
• Follow the safety instructions on the labels attached to the instrument as well
as in this manual to ensure safe use of this laser product.
*: only for instruments with laser plummet ( )
• Never intentionally point the laser beam at another person.The laser beam is
injurious to the eyes and skin. If an eye injury is caused by exposure to the laser
beam, seek immediate medical attention from a licensed ophthalmologist.
• Do not look directly into the laser beam. Doing so could cause permanent eye
damage.
⋡߳ߩ⋥ធⵍ߫ߊࠍㆱߌࠆߎߣ
ࠢ࡜ࠬ4࡟࡯ࠩ⵾ຠ
,+5%
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
/#:O9.&PO
MAX 5mW LD 625-695nm
CLASS3R LASER PRODUCT
IEC 60825-1 Ed. 2.0 : 2007
࡟࡯ࠩశ
࡟࡯ࠩశߩ಴ญ
AVOID EXPOSURE-Laser radiation
is emitted from this aperture.
Laser beam
emitted
from here
*
Laser beam
emitted
from here*
LED beam
emitted
from here