Sojet Elfin IC, Руководство пользователя

Страница: 15 / 41

15
5.2.3 Printing Delay
Click , printing delay
setting interface appears (see
Figure 4)
See Appendix 1: Terms
and Definitions 1 for more
information.
(Figure 4)
While execute Multi-Files printing,
user can set the delay distance for
each single file.
A. Printing delay default value: 30mm;
B. Printing delay value range: 0.0-999.9mm;
C. It is allowed to set printing delay value during printing process: the newly set value becomes valid for
immediately next printing.
D. Printing delay value for each message are independent from one another, the delay setting for current
data file will not affect another data file.
5.2.4 Print Initial Values
Click , the interface of
initial values setting and repeated
index value checking appears.
System switch
DEC-10 decimal (0-9)
H36-36 hexadecimal (0-Z)
The Generic Binary is editable;
See5.4.2
System switch
Counter
synchronizing
Counter Synchronizing: when
multi counter included in the same
file, click , then all
counters’
current value will be synchronized
to counter 1’s current value.
After confirmed, a dialog box will
display the counters’ setting, user
can set the
counter’s
begin/end/step/repeat number and
the binary regulation.
5.2.5 Stop Printing
Click to stop printing and exit printing report, return to Start Printing status (see Figure 2).
Note: Printer automatically stops printing when there is case as power-off, out of ink, alarming etc.