manualshive.com logo in svg

Soho WER-401, Руководство пользователя

Поделиться
Скачать
Soho WER-401 Скачать руководство пользователя страница 18

  

WER-401

 

Wireless SOHO Firewall Gateway 

 

The Test LED is steady green on. If this LED is still blinking after one minute, then an 
error has occurred. If it is reciprocally blinking with yellow and green within one minute, 
the wireless SOHO Firewall gateway is performing self-diagnostic tests. 

 

The Wireless LED is steady green on. This LED blinks when there is traffic. 

 

The Local LEDs are lit green for any local ports that are connected to a 10 Mbps device 
and are lit yellow when connected to a 100 Mbps device. These LEDs blink when there is 
traffic. 

 

The Internet LED is lit steady green when a link has been established to a connected 
device. This LED blinks when there is traffic. 

2.6  Back to Factory Defaults 

The factory default configuration settings are: 

• 

Web Configurator password is 1234  

• 

The IP address to 192.168.1.1 

You can erase the current configuration and restore factory defaults in two ways: 

1. Use 

the 

Restore Factory Default Configurations 

function of the Web Configurator.  

2. Use 

the 

Restore Factory Defaults

 button on the rear panel of the wireless SOHO Firewall 

gateway. Use this method for cases when the Web Configurator password or IP address is not 
known. 

2.6.1  Procedure To Use the Restore Factory Defaults Button 

1. Press 

the 

Restore Factory Defaults

 button for 10 seconds, and then release it. If the TEST LED 

begins to blink, the defaults have been restored and the router is now rebooting. Otherwise, go to 
step 2. 

2.  Disconnect the power from the router. 

3.  While depressing the 

Restore Factory Defaults

 button, reconnect power to the router. 

4.  Continue to hold the 

Restore Factory Defaults

 button. The TEST LED will begin to blink, then 

will flicker very quickly after about 10 or 15 seconds. This indicates that the defaults have been 
restored and the device is now rebooting. 

5. Release 

the 

Restore Factory Defaults

 button and wait for the device to reboot. 

You are now ready to begin configuration of your network, as described in the following chapter.

Hardware Setup 

 

2-5 

Содержание WER-401
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды