Söhner Kunststofftechnik GmbH
Seite 1 / 2
Industriestraße 29
D-74193 Schwaigern
T +49 7138 812-200
F +49 7138 812-520
[email protected]
www.soehner.de
Version 01
04/2020
Installation manual
Room separator LIGHT
The room separator LIGHT is made of lightweight polypropylene twin wall sheets and consists of two parts:
a wall panel and a foot-stand
. Due to the smart design, the room separator will be set up in only a few
steps – easy, fast and without the use of tools. With special
bayonet locks
the wall panels can also be
connected to each other in no time.
Step 1: Set-up and positioning of the food-stand
Step 2: Set-up of room separator
1.1 Flap both sides of the foot-stand
upwards.
1.2 Fasten the sides using the
support elements. The support
elements need to be plugged
into the base panel.
1.3 Place and position the foot-
stand. The stand can also be
fixed to the floor using hook
and loop fastener.
2.1 Put the wall panel from above
into the foot-stand.
2.2 Push the wall panel completely
down the food-stand till it
reaches the floor.
2.3 The room separator is set up.
