Softube AAX DSP Скачать руководство пользователя страница 91

Страница: 91 / 182

| 91

Trident A-Range

Foreword by Malcolm Toft

I have evaluated the Softube Trident A-

Range equaliser plug-in at my studio with

some very experienced recording engineers.

After exhaustive listening tests with many

different instruments and vocals, I am pleased

to say that we all agree this is an incredibly

accurate software recreation of my original

A-Range design from 1971.
It exhibits all of the nuances of tone from the

original, right down to the ‘saturation’ control

which emulates the overdriven artifacts from

the original when large amounts of equalisa-

tion are applied or the input is driven hard.
Well done to all the guys at Softube.
Professor Malcolm Toft

Original designer of the Trident A-Range

console

Torquay, Devon, England

December 17, 2009

Background

The Trident™ A-Range® is a legendary

piece of equipment. As only thirteen A-Range

consoles were ever made, it remains a holy grail for

sound engineers and producers around the world

that hope to create equal works of art to those that

were originally recorded on the A-Range – David

Bowie’s Ziggy Stardust, Queen, Elton John, the list

goes on...
The A-Range was originally designed in the early

70’s for Trident Studios in London by Malcolm

Toft and Barry Porter. Toft was employed as a

sound engineer at Trident Studios and when the

studio needed a 24 track recording console, he

started Trident Audio Developments to design

and build the Trident A-Range. Other products

followed and found their way to studios around the

world. Toft remains active to this day, developing

products under the Trident name.
The A-Range plug-in from Softube is the first and

only native plug-in that has been fully endorsed by

Toft and Trident Audio.

Содержание AAX DSP























































































































































































Результаты поиска

Содержание AAX DSP

Отзывы:

Softube AAX DSP, Руководство пользователя, Страница: 91 / 182

Результаты поиска

Содержание AAX DSP

Отзывы: