Softube AAX DSP Скачать руководство пользователя страница 88

Страница: 88 / 182

88 | TONELUX TILT

changing the actual volume of the mix.

In normal operating mode (Boost Ceiling on full),

the filters in the Tilt/Loud circuit will attenuate

some frequencies while boosting others, just like

the normal TILT plug-in. For live performance

purposes this can be a drawback, since boosting

frequencies can sometimes cause feedback in a live

monitoring system.
By setting the Boost Ceiling on min, you have

limited the amount of boost to 0 dB, ie., no boost

at all. Whatever setting you put on the TILT LIVE

plug-in, it will never boost any frequencies.

For monitor systems on stage the TILT LIVE can help
you changing the balance of a mix without having to risk
getting feedback from increasing the volume.

Boost Ceiling

When using the TILT LIVE the Gain control will

be replaced with a Boost Ceiling control.
The Boost Ceiling control makes the Tilt filter

behave differently depending on the Boost Ceiling

setting.
When the Boost Ceiling is at its minimum the au-

Filter Section

The filter section with its two filters will further

shape the sound or help you get rid of problematic

frequencies in a track. The Low Pass filter cut-off

frequency goes from 16 Hz to 1 kHz and will at-

tenuate the signal 6dB per octave. When the 12 dB/

Oct switch is engaged the signal will be attenuated

12 dB per octave.
The High Pass filter cut-off frequency goes from 20

kHz to 500 Hz and is set to attenuate the signal 6

dB per octave.
By engaging/disengaging the Filter In button the

HP and LP filters will be enabled or in bypass

respectively.

Output Section

Depending on what version of the TILT you are

running, the TILT or TILT LIVE, the knob in the

output section will be either a Gain control (TILT)

or a Boost Ceiling control (TILT LIVE). The Boost

Ceiling is explained below in the TILT LIVE sec-

tion.
The Gain control is a standard make up gain going

from -6 dB to +6 dB.
The Polarity Invert button inverts the phase when

pressed (lit up).

Tilt Live

The TILT LIVE plug-in is optimized for the Avid

VENUE system and contains features requested by

live sound engineers. The TILT LIVE version does

not include the transformer modeling to preserve

DSP power and features the Boost Ceiling control.

The TILT LIVE is perfect for in-ear systems when you
want to tweak the mix to adjust for ear fatigue, without

Содержание AAX DSP























































































































































































Результаты поиска

Содержание AAX DSP

Отзывы:

Softube AAX DSP, Руководство пользователя, Страница: 88 / 182

Результаты поиска

Содержание AAX DSP

Отзывы: