Softube AAX DSP, Руководство пользователя, Страница: 135 / 182

SOFTUBE USER’S GUIDE | 135
Basic Limiting
Limiting is a hard Inf:1 ratio compression that can be used to increase the apparent volume, or to even out dynamic
differences in a track. It works by reducing the gain for passages that are louder than the selected threshold. The
limiting mode on the Dyna-mite is often used to squash drum tracks.
Mode: limit (limiting)
Detector Source: INT (internal source)
Detector Type: AVG (slow attack) or PEAK (fast attack)
Threshold: Adjust to set amount of limiting (as read from the GAIN REDUCTION meter).
Release: Adjust to set release time
Range: 60 dB
Output: 0—15 dB
Procedure
1. Set Threshold until you get the desired amount of limiting, as red on the LED array.
2. Set the Output volume until you get the desired output volume.
3. Set the Release control by ear. If you get too much pumping, increase the release time.
4. Toggle the Detector Type between avg and peak to get different attack times.
Clip LED
Modes Display