Softube AAX DSP, Руководство пользователя, Страница: 117 / 182

SOFTUBE USER’S GUIDE | 117
Gain Staging
You might get confused by the three different gain
controls on the units (PE 1C: Output Gain, ME
1B: Output Gain and CL 1B: Gain). All these
volume controls are controlling the output volume
of each unit.
If the equalizers are inserted before the compressor,
their Output Gain controls will affect the Thresh-
old and gain reduction of the compressor. If they
are inserted after the compressor, they will of course
not affect the operation of the compressor.
The best way to use these volume controls is to
make sure the apparent audio level stays approxi-
mately the same when you bypass the unit. That way
it will be easier to bypass and compare the audio,
and also to switch order of the compressor and
equalizers.
CL 1B Compressor Gain Staging
Just like the stand-alone CL 1B plug-in, the Classic
Channel’s CL 1B is calibrated so that a -18dBFS
signal reads 0 VU.
Sidechain and the Equalizers
No, the equalizers does not affect the external
sidechain of the compressor.
Credits
Niklas Odelholm – modeling, Arvid Rosén –
modeling. Torsten Gatu – framework program-
ming. Oscar Öberg – modeling. Ulf Ekelöf – 3D
rendering. Original hardware was designed by John
G. Petersen at Tube-Tech/Lydkraft ApS, Denmark.
TUBE-TECH IS A REGISTERED TRADEMARK OF
LYDKRAFT ApS, DENMARK. ALL SPECIFICATIONS
SUBJECT TO CHANGE WITHOUT NOTICE. ALL
RIGHTS RESERVED.