Softube AAX DSP, Руководство пользователя, Страница: 115 / 182

| 115
20
Tube-Tech Classic Channel
The Tube-Tech Classic Channel contains
three different Tube-Tech products, the opto- com-
pressor CL 1B and two Pultec clones; the PE 1C
program equalizer (the “classic” Pultec) and the
ME 1B mid-range equalizer. On their own, these
products immediately and easily produce a beauti-
ful result, and combined they become an extremely
powerful tool that lets you shape the sound of a
track, bus or the whole mix.
As well as providing these beauties as separate plug-
ins, we also chose to combine them into a single
powerful plug-in—the Classic Channel. The Classic
Channel lets you bypass or engage any of the units,
as well as change their order. By bypassing them,
they won’t take up any of your precious CPU, so you
can might as well get used to always use the Classic
Channel whenever you need just some CL 1B mojo
or Pultec vibe. It makes it easier to add some eq or
compression if necessary at a later stage...
Take the time to get to know the individual units
and we assure you that you won’t get disappointed.
There is something about these designs that just
make your tracks sound just the way they should...
And that’s just the reason to why we chose to emu-
late them.
A Note on Terminology
We have chosen to keep all the labels in the user
interface faithful to the original units, even when
discrepancies occur. The kilohertz label on the PE
1C is for example labeled “KCS” (kilocycles per
second), while it’s labeled “kHz” on the ME 1B.
Both the peak filters on the ME 1B are labeled as
“ High Frequency ” and “ Low Frequency ”, while they
are referred to in the manual as “ High Mid Frequen-
cy ” and “ Low Mid Frequency ” in order to separate
them from the real high and low frequency filters in
the PE 1C.
User Interface
The user interfaces of the three individual units are
the same as the individual plug-ins, so please see
their respective chapter for more information.