(A)
Main rack assembly
(B)
Bike rack arms (2)
(C)
Arm straps (8)
(D)
Hitch bolt with lock washer (5/8" for 2" rack, 1/2" for 1.25" rack)
(E)
Soft wraps (4)
(F)
Detent pins (2)
For 1.25” racks only
(G)
1.25” hitch bar
(H)
Fasteners for 1.25" hitch assembly 3 each 10mm bolts,
washers and lock nuts (2 – 100mm and 1 – 50mm long)
PARTS INCLUDED
ELEMENT RACK INSTRUCTIONS
Adjustable wrench (2)
Screw driver
TOOLS REQUIRED
Important
This rack is designed for use with a 2" or 1.25" receiver hitch (model 26044 or 26045). The rack is designed to
hold 4 bikes or a maximum of 120 pounds. Do not use it for anything other than carrying bikes. This rack is not
recommended for use on the back of a trailer.
Warning
Check the tightness of bolts and nuts periodically as they may loosen during regular use, especially the hitch
receiver bolt if the rack is left attached to the vehicle for extended periods of time.
Warning
Do not drive with the bike rack in the lowered position.
Warning
Remove the rack from the vehicle when driving through a car wash.
(C)
(E)
(A)
(B)
(D)
(F)
(H)
(G)
1 1/4" HITCH COMPONENTS
