Chapter 9 - Settings pages
26
TH LINK PROFINET - Installation Manual
9.1.1
User administration - change password
1. Log in as administrator to change the settings (see
).
2. Click
Settings
TH LINK.
3. Enter the old password.
4. Select a new password and confirm it by re-entering.
5. Finally click
Change password
.
9.1.2
TH LINK description
Here you can enter the tag name, the location, an installation date, a
description of the installed TH LINK and the default language.
For detailed information about each setting, click on the question
mark.
9.1.3
Network configuration
Here you can change the network-specific settings. These include
hostname, configuration method for office and automation network,
DNS server and time server use.
For detailed information about each setting, click on the question
mark.
9.2
TH SCOPE
1. Log in as administrator to change the settings (see
).
2. Click
Settings
TH SCOPE
.
The TH SCOPE settings page includes all settings required for
monitoring the automation network. These include settings for
measurement, alerting and parameter distribution.
Note
In order to save data after a voltage recovery on an SD
card, set the parameter
Data restore after voltage
recovery
to
Yes
(see also
).
Содержание TH LINK PROFINET
Страница 35: ...This page is intentionally left blank...
