Modbus Gateways - User Guide
22
Version EN-092019-1.21
4.3
Setting the IP address of your PC
If you have not changed the IP address of the Modbus Gateway as described in the previous
you
will need to configure the IP address of your PC to access the gateway from your PC.
The following chapter describes how to set a static IP address in Windows 10.
1. Click
Start Windows System Control Panel
from your task bar.
2. Select
Network and Internet
Network and Sharing Center
.
A new window opens where you can view your basic network information.
3. Click on your Internet connection (either Ethernet or wireless) next to Connections under
View your
active networks
.
A new window opens.
4. Click
[Properties].
5. Select
Internet Protocol Version 4 (TCP/IPv4)
.
The following window opens.
6. Select
Use the following IP address
and enter a specific IP address and Subnet mask. In our example
we use the following settings:
IP-Adresse:
192.168.0.1
Subnet mask:
255.255.255.0
7. Click
[OK]
to confirm.
20
