Softing FG-200 HSE/FF, Руководство пользователя

Страница: 31 / 82

Chapter 6 - Using the web interface
Version EN-112021-1.30.3
31
6
Using the web interface
After an IP connection between PC and FG-200 has been set up as described in Configuration , you may
access the FG-200 from your PC by means of a web browser that supports JavaScript (e.g. Microsoft
Internet Explorer).
The internal web server of the FG-200 offers the possibilities to configure the device (such as IP address
settings or Modbus mapping), to get diagnostic information on the fieldbus or Modbus as well as to
monitor process values of the connected field devices.
6.1 Login to webserver
1. Start your web browser with the URL http://192.168.0.10.
You are prompted to log in with username and password.
2. Enter administrator in the field Username .
3. Enter
fgadmin
in the
Password
field (default setting - refer also to Settings - User Accounts ).
The start page is opened - in our example the Information page (refer to Homepage submenu) .
Depending on the web browser you are using the information presentation may vary slightly:
The menu bar on the left side offers three main menus and several submenus:
§
Information menu
§
Diagnostics menu
§
Monitor menu
§
Configuration menu
Note
If you erase the FG-200 configuration, the password is reset to its default value.
25
39
45
32
33
35
36