Softing epGate DP, Руководство пользователя

Страница: 34 / 56

EtherNet/IP Gateways - User Guide
34
Version EN-062020-1.00
7
LED status indicators
The EtherNet/IP Gateway displays eight device status LEDs and two RJ45 connection status LEDs on the
front side:
Device status LEDs RJ45 status LEDs
PWR = Power supply - refer to next section
RUN = Running - refer to next section
ERR = Error - refer to next section
CFG = Configuration - displays configuration upload - refer to next section
Net = Network, displays EtherNet/IP Network status
Mod = Module, displays EtherNet/IP module status
SF = System faults - displays EtherNet/IP /PROFIBUS system faults (wrong configuration,
internal error, ...) - refer to EtherNet/IP LEDs and PROFIBUS Master LEDs (PA)
BF = Bus faults - displays EtherNet/IP /PROFIBUS bus faults - refer to EtherNet/IP LEDs
and PROFIBUS Master LEDs (PA)
The device status LEDs are permanently on or flash in different colors and frequencies as indicated below:
Symbol Color Lighting
none off
red permanent
green permanent
red flashing (1 Hz)
red flashing quickly (5 Hz)
green flashing (1 Hz)
green flashing slowly (0.5 Hz)
green flashing quickly (5 Hz)
The RJ45 status LEDs indicate the following behaviour:
Symbol Color Lighting
green permanent when Ethernet
connection is on
yellow flashing when Ethernet
connection is active
35
35
35
35
36 37
36
37