SoftBank SoftBank 101N, Руководство пользователя

Страница: 11 / 96

9
Getting Started
SoftBank 101N
Insert Battery
・Engage Battery studs in slots (product name facing up),
slide Battery in so that terminals meet, then lower .
・Do not force Battery into place if studs are not engaged in
slots, because you might break studs.
Slide Lock Switch to LOCK side
Attach Battery Cover
・Insert studs of Battery Cover
, then press Battery Cover
firmly down .
・Press down firmly at circled locations and check there are
no gaps between Battery Cover and Body.
Precautions for Handling USIM Card
Heat Generation
USIM Card may get hot while in use, but that is not
abnormal. Please continue to use it.
Handling
Do not drop USIM Card or subject it to impact.
Such handling could break it.
Inserting and Removing USIM Card
Do not apply unnecessary force.
SD Card Installation
Handset accepts microSDHC/microSD Card up to 32 GB. Some
SD Cards may not operate properly.
Inserting SD Card
Always power off first.
Lift Battery Cover
・Use slot to lift Battery Cover.
Remove Battery Cover
・Insert finger into gap to remove Battery Cover, without
forcing.
Slide Lock Switch to FREE side
Remove Battery
・Keep pressing Battery
as you lift it .