SoftBank 910SH, Руководство пользователя

Страница: 231 / 403

10-14
10
Connectivity
Overwriting Existing Files
1
Select Delete All & Save and press
b
2
Choose Yes and press
b
3
Enter Handset Code and press
b
When transfer completes, handset returns to Standby.
^
When Phone Book is overwritten, My Details except
handset phone number is overwritten as well.
C
Press
M 3
to cancel.
C
Press
g
to end.
Receive folders from compatible devices and save to
handset Data Folder.
^
Handset does not support sending folders.
^
Handset receives folders when it can newly create a folder, or the
same folder name exists in the same layer as that of sender's.
^
For sender's procedures, see the device manual.
1
Choose On (3 min.) and press
b
Infrared is activated and handset returns to Standby.
^
Acquire infrared transmission within three minutes.
2
When connection is requested, Calling not
available during operation, OK? appears
3
Choose Yes and press
b
Offline Mode is set and transfer starts. When finished, handset
returns to Standby.
^
If the same folder name exists, received files are saved there.
C
Press
M 3
to cancel.
C
Press
g
to end.
Activate Mass Storage and connect handset to a PC via the
supplied USB Cable to access Memory Card from the PC
without removing the card from handset.
^
Activating Mass Storage activates Offline Mode.
^
Mass Storage is not available when battery is low, when an
S! Application is paused or while Music Player is active.
1
Select Mass Storage and press
b
Calling not available during operation, OK? appears.
2
Choose Yes and press
b
3
Connect handset to a PC via USB Cable
^
If it is already connected, remove it then reconnect it.
Receiving Folders
Main Menu
H
Settings
A
Connectivity (
F
)
A
Infrared
A
Switch
On/Off
Mass Storage
Main Menu
H
Settings
A
Connectivity (
F
)