SoftBank 101P, Руководство пользователя и инструкции по сборке

Страница: 79 / 92

77
Safety Precautions
SoftBank 101P
If you use an implantable cardiac pacemaker or
cardioverter defibrillator, keep handset more
than 22 cm away from the implant at all times.
Handset radio waves may affect implantable cardiac
pacemaker or cardioverter defibrillator operations.
Persons using electronic medical equipment
outside medical facilities should consult the
vendor about possible radio wave effects.
Handset radio waves may affect electronic medical
equipment operations.
Observe the following in medical facilities.
Handset radio waves may affect electronic
medical equipment.
- Do not take handset into operating rooms, Intensive Care
Units or Coronary Care Units.
- Turn off handset inside hospital wards.
- Turn off handset even outside hospital wards (in hospital
lobbies, etc.); electronic medical equipment may be in use
nearby.
- Where a medical facility has specific instructions
prohibiting the carrying and use of mobile phones, observe
those instructions strictly.
Turn off handset in crowded places such
as rush hour trains; implantable cardiac
pacemakers or cardioverter defibrillators may
be in use nearby.
Handset radio waves may affect implantable cardiac
pacemaker or cardioverter defibrillator operations.
Materials
Handset
Parts Materials/ Surface Finish
Outer case:
Around the
key of side
surface
ABS/UV coating
Outer case:
Display
surface
PA/UV coating
Outer case:
Around the
key of display
surface, Side
surfaces of
the Battery
Cover side,
Battery
surface,
PC/UV coating
Outer case:
Battery Cover
PC/Aluminum foil, UV coating
External
Device Port
terminal:
Metal part
Stainless steel/Nickel plating, Tin plating
External
Device Port
terminal:
Resin part
PC, Elastomer/UV coating
External
Device Port
Cover
Silicon rubber
Camera ring
area (Inside)
Aluminum/Alumite treatment
Camera ring
area (Outside)
ABS/UV coating
Camera lens
area, Infrared
data port area
PMMA/Hard coating, AR coating, Water-
repellent coating
Keys: Menu
key, Home
key, Back key,
Power key,
Volume keys
PC/UV coating
Keys: Shutter
key
PC/Aluminum vapor deposition, UV coating
Charging
terminal Brass/Nickel plating, Palladium plating,
Gold plating
Display panel Glass, PET/Surface hard coating
Battery
compartment
Glass epoxy substrate
Battery
compartment
surface
Aluminum