Soehnle Professional 3035 Скачать руководство пользователя страница 108

Страница: 108 / 124

108

6.8.3 Display information field

In the setting mode / program settings / check / display information field, you can set which data are

displayed in the information field.

The following options are available:

> Factory setting: Change between the individual functions used, e.g. control light, totalizing memory,

organization data memory.

> Control display: Continuous display of the traffic light function.

> Total: Continuous display of the totalizing memory.

> Last item: Continuous display of the last item.

> Organizational data + database: Continuous display of organizational data memories.

> Check fixed values: Continuous display of the activated control fix memory.

> Barcode content: Continuous display of the scanned barcode.

> Code128 Weight value: Display Barcode128 with the current stability weight value.

> Volume: Display volume only after activating the volume measurement function.

Example Setting Display Information field on control display:

1. Under tolerance

2. within tolerance

3. Above tolerance

(setpoints reached exactly)

6.8.4 Tare function

The description and detailed instructions for the tare function can be found in chapter 6.5.

6.8.5 Control functions

Input setpoints

In level 1 Control functions, press the F1 setpoint key.

You can now place a sample part to accept the setpoint or enter the setpoint in the adjusted unit with the

numeric keypad. Confirm with the F6 key Accept.

Using the numeric keypad, enter the accepted tolerance in the adjusted unit or in percent and confirm with

the F6 Accept key. Switch between units and percent with the key.

If you want to define plus and minus tolerance separately, activate

+/- tolerance separately in setting mode.

Depending on the setting of the information field or the secondary display, the display switches to the

respective display view Check, the traffic lights and special characters are activated. The corresponding

traffic light or special characters are displayed according to the actual status on the scale for the setpoint.

Содержание 3035





























































































































Результаты поиска

Содержание 3035

Отзывы:

Soehnle Professional 3035, Руководство пользователя, Страница: 108 / 124

Результаты поиска

Содержание 3035

Отзывы: