Sodi RS3 KZ DD2, Руководство пользователя и по обслуживанию

Страница: 8 / 50

10/2022
8
EN
USER AND MAINTENANCE MANUAL
3 - Assembly
3.1 - Precautions and recommendations
●
Tightening torque Ø 6 = 10 to 12 Nm.
● Tightening torque Ø 8 = 12 to 23 Nm.
● Tightening torque Ø 10 = 23 to 47 Nm.
● Tightening torque for Tekneex rear axle bearing 80/50
C4: 8 Nm.
● Tightening torques for rims on hub: 25 Nm.
● M8 bleed screw: 12 Nm.
●
M10 bleed screw: 16 Nm.
● Screws without bolts: 1 drop of special glue (LU861.001).
● Lubricate rotating parts, ball joints, gas cable...
● Do not overtighten screws and bolts.
3.2 - Frame stabilizers
Legend
1 Frame stabilizer
2 Stabilizer sleeve
● Always attach the stabilisers to the frame
with a sleeve at each side.
3.3 - Positioning of the safety brake cable
1 2
Legend
1 Safety cable
2 Brake rod
► Always fit the safety cable clips (1) under the
staples of the brake rod (2).
1
2
Legend
1 Spring clip
2 Plastic collar Rilsan