Sodi RS3 KZ DD2, Руководство пользователя и по обслуживанию

Страница: 18 / 50

10/2022
18
EN
USER AND MAINTENANCE MANUAL
5.2 - Adjustment of front wheels
5.2.1 - Adjustment of front tracking width
The adjustment of the front width is realised with several
spacers (spacer of 15 mm, and spacers of 5 mm for each
stub axle), and 2 hubs type (short hub: 90 mm or long hub:
100 mm).
● The wider the front train is, the harder the
steering is.
● The narrower the front train is, the easier the
steering is.
● If you wish increase the front grip, increase
the width of the front with spacers.
Dry track
A
B
It is advisable to adjust the front train with a spacer of 15 mm
(A) (1 spacer of 15 mm inside), and use the short hub: 90
mm (B).
● With the front brake on your chassis, the
adjustment of the front is limited.
● You must not use more than a 20 mm spacer
(A) (1 spacer of 15 mm and 1 spacer of 5 mm),
on the yoke side on each stub axle if the kart is
equipped with front brake.
Wet track (without front brake))
A
B
It is advisable to adjust the front with a spacer of 25 mm (A)
(1 spacer of 15 mm and 2 spacers of 5 mm inside), and use
the long hub: 100 mm (B).
Wet track (with front brake)
A
B
It is advisable to adjust the front train with a spacer of 20 mm
(A) maximum (1 spacer of 15 mm and 1 spacer of 5 mm
inside), and use the long hub: 100 mm (B).
● With the front brake on your chassis, the
adjustment of the front is limited.
● You must not use more than a 20 mm spacer
(A) (1 spacer of 15 mm and 1 spacer of 5 mm),
on each stub axle if the kart is equipped with
front brake.
● Use long hub: 100 mm (B) on wet track.
5.2.2 - Adjustment of front wheel height
A
B
● Place a 6 mm spacer on top and a 8 mm spacer at the
bottom.
Adjustment (A + B = 14 mm)
A B
4 10
Standard adjustment 6 8
7 7
8 6
10 4