STEP 1: Uninstall Any Scanning Software
Delete any bar code scanning software you may already have installed in
your computer, including software from other companies.
1.
Make sure the bar code scanning software is closed, and remove the CF
Mag Stripe Reader Card from your computer.
2.
Click
Start | Control Panel | Add or Remove Programs
.
3.
Select the bar code scanning software from the list. Click
Change/Remove
.
4.
Click
Yes
to confirm removal of the program.
STEP 2: Install the Software
1.
Insert the installation CD into the CD drive of your computer.
Use
My Computer
or
Windows Explorer
to access your CD drive. In the
CD contents, click on
Setup
.
Note: If you downloaded the software from Socket’s website, extract the
contents and click on Setup.
2.
The SocketScan Setup Center will appear in your web browser. Read
the information in the welcome screen, then scroll down to click
next
at
the bottom of the screen.
•
Read the information in the welcome screen, then scroll down to
click
next
.
•
In the Main Page, click
Install
Software
.
•
In the Installation Page, click
Windows
XP
.
CHAPTER 3: SETUP FOR WINDOWS XP
17
