SnowWolf Flex Plow, Руководство по эксплуатации и техническому обслуживанию

Страница: 30 / 52

28
Flex Plow Operation and Maintenance Manual
Maintenance
General Maintenance
AVOID SERIOUS INJURY OR DEATH
Before operating or servicing system: Read
and understand the machine’s owners
manual.
Follow the warnings and
instructions in the manual when making
repairs, adjustments, or servicing. Check for
correct function after adjustments, repairs
or service. Untrained operators and failure
to follow instructions can cause injury or
death.
To ensure efficient operation, you should inspect,
lubricate, and make necessary adjustments and
repairs at regular intervals. Keep good
maintenance records and adequately clean your
machine after each use.
Proper lubrication is important. Follow all
lubrication instructions and schedules included in
this section.
Daily Inspection:
• All components and hardware to ensure
equipment is secure and thoroughly tightened.
• Frame and all welds for cracks or damage.
• Wear plates (if equipped) for wear or damage.
• Mounting frame for proper operation and signs
of damage or unusual wear.
• Safety signs and reflectors for damage.
Replace any missing or damaged decals.
• Cutting edge for wear or damage.
• Hydraulic hoses and fittings for wear, damage
or leaks.
NOTE: Repair or replace any damaged parts.
NOTE: After initial use, or repair/replacement
of damaged parts, it is important to
check the repaired or replaced parts for
proper bolt torque and operation.