SnowWolf Flex Plow, Руководство по эксплуатации и техническому обслуживанию

Страница: 29 / 52

27 Flex Plow Operation and Maintenance Manual
Maintenance
Maintenance Safety
AVOID SERIOUS INJURY OR DEATH
Never operate the machine in a closed
building. Proper ventilation is required when
operating
the machine under all
circumstances.
AVOID SERIOUS INJURY OR DEATH
Stop the engine, release auxiliary
hydraulic pressure and disconnect the
auxiliary hydraulic hose quick couplers
before performing maintenance on the Flex
Plow.
• Always keep the work area clean and dry.
• Always use personal protection devices such
as eye, hand and hearing protection when
performing any service or maintenance.
• A fire extinguisher and first aid kit should be
readily
accessible while performing
maintenance on this machine.
• Always relieve hydraulic system pressure
before disconnecting the Flex Plow.
• Always disconnect hydraulic connections
between the machine and the Flex Plow before
performing maintenance.
• Before working or doing maintenance on this
machine, shut off the engine and remove the
key. Make sure the machine’s wheels are
blocked.
• Never work under the machine or attachment
unless the machine or equipment is blocked or
supported securely.
• Disconnect the battery (both terminals) before
welding on any part of the machine. Failure to
do so may cause damage to electrical
components.
• When working around batteries, remember
that all of the exposed metal parts are “live”.
Never lay a metal object across the terminals
because a spark, short circuit, explosion or
personal injury may result.
• Battery posts, terminals and related
accessories contain lead and lead compounds.
Wash hands after handling.
• Never search for leaks with your hands. (See
“Hydraulic Safety” on page 13.)
• When replacement parts are necessary,
genuine factory replacement parts must be
used to restore your equipment to original
specifications.
SnowWolf will not be
responsible for injuries or damage caused by
use of unapproved parts and / or accessories.
• When completing service or maintenance on
this machine, make sure all shields and guards
are installed before placing the machine into
service.