SNOWJOE iON100V-21SB-CT-RM, Руководство оператора

Страница: 20 / 24

20
Troubleshooting
m
WARNING!
Always turn the tool OFF and remove the battery pack(s) before performing any adjustments, maintenance,
or repairs to your cordless blower vac.
Unit will not
start
The auger doesn't
rotate while the
motor is running
1. Batteries are flat.
2. Batteries are not locked in
position.
3. The safety button is not depressed
1. Auger belt is wore out
2. Auger belt is not assembled properly
1. Charge the batteries
2.
Reinsert the battery, and try to start the machine
again.
3. Depress the safety button, and pull the switch bar
lever.
1. Change the auger belt
2.
Check the auger belt, make sure it's assembled
tightly on the rail
Problem Possible Cause Solution
Chute doesn't
rotate when
pressing the
button
1. There's no power.
2. Too much wet snow are accumulated
around the chute and preventing the
chute rotating.
1. Make sure the battery pack(s) are charged and
locked in position.
2. Clean the wet snow around the chute.
Snow left on
the ground after
cleaning
1. Worn out auger blades
2. Worn out scraper bar 1. Replace the blades
2. Replace the scraper bar