9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • snowdoggplows.com
INSTRUCTIONS
Always verify that all truck lights are functioning correctly before beginning any installation.
FOR DODGE SPORT APPLICATION – use the OUTBOARD headlamps
1.
Disconnect both PS and DS side truck headlights from the truck headlight harnesses.
2.
Connect the 16071120 adapters to the truck headlights and truck headlight harnesses.
3.
Connect the 16071120 adapters to the 8-pin RELAY HARNESS connectors.
4.
Use an included Tap connector to tap the PURPLE wire into the TURN light circuits on the passenger and
driver sides of the truck.
If the truck is a SWITCHED GROUND INSTALL – skip step 5 and go to the special instructions (on back
of this page).
5. Use an included Tap connector to tap the BROWN wire into the PARK light circuits on passenger and driver
sides of the truck.
6. Check all light functionality before operating the plow.
SnowDogg
®
Snowplow Headlight Adapter
installation instRUCtions
16071120
HB5
HB5/9007
DODGE
2000-2004
Dakota
2002-2005
RAM 1500
2003-2005
RAM 2500/3500
FORD
1998-2011
Ranger
1995-2001
Explorer
2001-2003
Explorer Sport
2001-2006
Explorer Sport Trac
1997-2002
Ford Expedition
1997-2003
F150
1997-1999
F250LD
1992-1997
F250HD/F350/SD
1999-2004
F250SD/F350/F450/F550
JEEP
2003-2007
Liberty
NISSAN
2005-2012
Frontier/Pathfinder
HB5/9007
SWITCHED GROUND
DODGE
1999-2001
RAM 1500 - QUAD/SPORT
1999-2002
RAM 2500/3500 - QUAD/SPORT
If your application is not shown here, contact your dealer for further assistance
NOTE: The 16071120 Headlight Adapter is only for use with HB5 headlights. HB1 headlights use the
same connector, but require a 16071130 adapter. Always check the application guide and your bulb
marking before installation.
—continued on back
