Grinding machine AF.C
User Manual (English)
GENERAL SECURITY
WARNING
Read all instructions. Failure to comply with the instructions outlined below
can cause accidents such as fire, electric shocks and / or injuries. The
term "Power tool" used in the safety below includes both tools powered
with electricity network as tools powered by battery.
KEEP THESE GUIDELINES
.
1) AREA OF WORK
a) Be sure to keep your work area clean and well light. Dark and cluttered
spaces are conducive to accidents. .
b) Do not use power tools in an explosive environment, for example in the
proximity of flammable liquids, gases or dust. The sparks from power tools
can ignite fire or explode.
c) Keep children and visitors on the sidelines when using a power tool. They
could distract you and make you lose control of the tool.
2) ELECTRICAL SAFETY
a)
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
e) Keep the cord in good condition. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric
shock.
f) When working outside, use only extension cords designed to be used
outside. This will help avoid the risk of electric shock.
3)PERSONAL SAFETY
a) Stay alert, watch what You are doing and use common sense when oper-
ating a power tool. Do not use a power tool while You are tired or under
the influence of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
b)
Use safety equipment. Always wear eye protection. Safety equip-
ment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal inju-
ries.
.
c)
d) Do not overreach. Keep proper footing and balance at all times. This ena-
bles better control of the power tool in unexpected situations.
e) Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your applica-
tion. The correct power tool will do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any
power tool that can not be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source before making any adjust-
ments, changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow per-
sons unfamiliar with the power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind, vibrate and are easier to control.
g) Use the power tool, accessories and tool bits etc., in accordance with
these instructions and in the manner intended for the particular type of
power tool, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from intended
could result in a hazardous situation.
5)
BATTERY AND POWER SOURCE TOOL USE AND CARE
a) Ensure the switch is in the off position before plugging battery pack.
plugging the battery pack into power tools that have the switch on in-
vites accidents.
b) Recharge only with the charger specified by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk of
fire when used with another battery pack.
c) Use power tools only with specifically designated battery packs. Use of
any other battery packs may create a risk of injury and fire.
d) When battery pack is not in use, keep it away from other metal objects
like paper clips, coins, keys, nails, screws, or other small metal objects
that can make a connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
e) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid enter in
contacts eyes, additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) RÉPARATIONS
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the
power tool is maintained.
CHARGER SAFETY
To reduce the risk of injury, use rechargeable Plumb batteries only.
Other types of batteries could explode and cause serious injury, or
damage to the tool.
Do not the shipper to rain or moisture.
Do not use materials other than those recommended and supplied by
the manufacturer. The use of any other could cause fire, electric shock
or serious injury.
To avoid damaging the shipper and the power cord, do not pull on the
cord but the plug to unplug the charger.
Make sure the power cord is positioned so that no one could step on it,
get caught in the feet, or damage it in any way.
Use an extension only if absolutely necessary. Using an improper
extension cord can cause a fire or electric shock. If you must use an
extension cord, make sure that:
A) The charger plug contains the same number of pins that the cap-
ture of the extension and that these are the same size and the same
shape.
B) The extension is in good condition and has sufficient capacity to
carry the required tension.
Do not use the charger plug or if the cord is damaged. If any of these
elements is damaged, have it repaired by a qualified technician.
Do not use the charger it has received a blow, if it is dropped or if it
was damaged in any way. Have it repaired by a qualified technician.
Do not dismantle your charger, have it repaired or maintenance by a
qualified technician. A non-conforming reassembly of the device can
lead to risk of electric shock or fire. .
To reduce the risk of electric shock, unplug the charger before its
maintenance or cleaning. Putting charger to "stop" does not reduce the
risk of electric shock.
Unplug the charger when not in use. To avoid the risk of electric shock,
do not touch the parts not isolated from the output connector or unpro-
tected terminals of the battery.
Keep these instructions. Check them regularly and use them to
inform other potential users. If you lend this tool also lend this man-
ual.
1
