Chapter 8 – Prestart Inspection
26
S1930E/S1932E/S2632E – 1360460
Tires and Wheels
Visually inspect the tires and wheels (refer to Figure 8.8)
to make sure they are suitable for service.
Figure 8.8 – Tires and Wheels
To inspect the tires and wheels:
1. Visually inspect the tires. They should be smooth
without any cuts, gouges, or missing rubber that
might affect aerial platform stability.
2. Check the wheels to see that the fasteners are in
place and are not damaged or loose.
Ground Strap
Make certain the ground strap (refer to Figure 8.9) is se-
curely fastened to the chassis. It should be long enough
to contact the ground surface to eliminate static electricity
from the machine.
Figure 8.9 – Rear of Chassis
Lower Control Station
With no personnel or materials in the platform, test the
operation of each control from the lower controls (refer
to Figure 8.10).
Figure 8.10 – Lower Controls
Operating Controls
Use the following procedure to operate and test the ma-
chine from the lower controls:
1. Turn the battery disconnect switch on.
2. At the lower controls, pull the emergency stop switch
outward to the on position.
3. Place the controls selector downward in the lower
controls position.
Danger
Pinch points may exist between moving components.
Death or serious injury will result from becoming
trapped between components, buildings, structures,
or other obstacles. Make sure all personnel stand
clear of the aerial platform while performing the pre-
start inspection.
Warning
The potential for an accident increases when operat-
ing an aerial platform that is damaged or malfunction-
ing. Death or serious injury could result from such
accidents. Do not operate the aerial platform if it is
damaged or malfunctioning.
4. Test the operation of the platform raise/lower switch
in both directions.
5. Place the battery disconnect switch in the off posi-
tion. The platform should not raise or lower with the
disconnect in this position.
Ground Strap
Emergency Stop Button
Platform Raise/Lower Switch
Control Selector Switch
Содержание S1930E
