background image

Chapter 5 – Operation

ML5I • ML10I • ML15I • ML20I • ML25I – 7030242   

15 

Two-Speed Shift

  1.  To change the winch speed, push the winch handles 

sideways in the direction of the desired speed.

  

SLOW 

y

 SPEED 

y

 FAST

  2.  Push the winch handles to the left to shift the winch 

to the slow speed.

  3.  Push the winch handles to the right to shift the winch 

to the fast speed.

  4. Turn the winch handles toward the mast until the 

winch locks.

Raising and Lowering the Load

  1.  Set up the material lift and position the load according 

to the procedures on the previous pages.

  2. Verify that the load is secured to the load lifting at-

tachment.

  3.  Shift the winch to the desired speed.

  4.  Firmly grasp both winch handles.

  5. Rotate the winch handles toward the mast to raise 

the load.

  6.  Rotate the winch handles away from the mast to lower 

the load.

    

  7.  After lowering the load to the desired position, rotate 

the winch handles one quarter-turn toward the mast, 

as if raising the carriage, to set the brake.

After Use

Reverse the Set Up procedure to prepare the material 

lift for storage.

Store the material lift on a firm, level surface that is pro

-

tected from the weather, dirt and other hazards that could 

reduce the lifespan of the equipment.

Содержание ML10I





























Отзывы: