background image

Introduction

The most im por tant chap ter in this man ual is the 
safety chap ter - Chap ter 1. Take time, now, to study 
it closely. The in for ma tion in Chap ter 1,  might save
your life, pre vent se ri ous in jury, or dam age to prop -
erty or the MHP15/44.

Standard MHP15/44

The stan 

dard MHP15/44 in 

cludes the fol 

low 

ing

fea tures:

Proportional speed control

Versatile jib boom

Heavy duty tow coupling

Heavy duty jockey wheel

Hydraulic disc brakes

High strength steel boom and base
construction

Reliable gasoline engine

Steel platform - 2 man capacity

600V AC rated wire to platform

Hour meter

Lockable hinged covers

Outrigger/boom interlocks

Independently operated hydraulic outriggers

Gravity gate

Options

The fol 

low 

ing op 

tions are avail 

able for the

MHP15/44:

360

o

 continuous rotation turntable

Flashing light

110/240V AC GFCI power to platform

Platform rotator

Lifting lugs

Automatic stabilisers

Alternative power options

Diesel engine

24V DC battery power

110/240V AC motor and pump

Combinations of the above with gas or
diesel to give a bi-energy power source

Sand blast protection kit

Operation Manual

This man 

ual pro 

vides in 

for 

ma 

tion for safe and

proper op er a tion of the ae rial plat form. Read and
un der stand  the  in for ma tion  in  this  Op er a tor's  man -
ual be fore op er at ing this ma chine on a job site.

Additional copies of this manual may be ordered
from Snorkel. Supply the model and manual part

number from the front cover to assure that the
correct manual will be supplied.

All in for ma tion in this man ual is based on the lat est
prod uct  in for ma tion  at  the  time  of  pub li ca tion.  Snor -
kel re serves the right to make prod uct changes at
any  time  with out  ob li ga tion.

Safety Alerts

A safety alert sym bol is used through out this man -
ual to in di cate dan ger, warn ing and cau tion in struc -
tions. Fol 

low these in 

struc 

tions to re 

duce the

like li hood  of  per sonal  in jury,  prop erty  dam age  or
dam age to the ma chine. 

The terms dan ger, warn ing, and cau tion in di cate
vary ing de grees of per sonal in jury or prop erty dam -
age that can re sult if the in struc tion is not fol lowed.

Denotes an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.

Denotes a potentially hazardous situation
which, if not avoided, could result in death or 
serious injury.

Denotes a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.

It may also be used to alert against unsafe
practices or action which may result in
damage to the MHP.

Notes
Notes are used to pro vide spe cial in for ma tion or
help ful hints to as sist in ae rial plat form op er a tion,
but  do  not  in di cate  a  haz ard ous  sit u a tion.

Operation

The MHP ae rial plat form has built in safety fea tures 
and has been fac tory tested for com pli ance with
Snor kel  spec i fi ca tions  and  in dus try  stan dards.
How ever, any per son nel lift ing de vice can be po -
ten tially dan ger ous in the hands of un trained or
care less  op er a tors.

Training is vi tally im por tant and must be performed
un der the di rec tion of a QUALIFIED per son. You
must dis play pro fi ciency in knowl edge and ac tual
op er a tion of the MHP be fore us ing it on a job site.

MHP15/44 – 12459A

page - iii

DANGER

WARNING

CAUTION

Содержание MHP15/44































































Отзывы: