Snorkel MB20J, Руководство оператора

Страница: 19 / 32

2. Operation & Specifications
2 - 9
Figure 4: Lower Control Panel
1. Emergency Stop
2. KeySwitch - Platform Controls
- OFF
- Lower Controls
3. Analogue Rocker
4. Selector Switch - Jib
- Mast
- Mast Rotate
5. Enable Switch
6. Ez 230 Display
TYPICAL OPERATION
Raising the mast.
• The Keyswitch must be turned to lower controls (2).
• Select Mast using the selector switch (4)
• Press up and hold the switch (5),
• Activate the Rocker Switch (2) in the direction required.
ELEVATING & LOWERING THE WORK PLATFORM
Before operating the MB20/26J Work Platform it is imperative that the pre-operation Safety
Inspection has been completed and any deficiencies have been corrected. The operator must
also be fully trained in the use of this machine.
Before beginning any operation, the following checks should be carried out.
NOTE: Chassis controls are for service use only.
!
!
ENSURE
that no other persons are within 1 metre of the machine.
Be aware of the pothole protection bar hazard on both sides of the
machine.
LOOK
up and around for obstructions before performing the lift or
drive functions.
DO NOT overload the platform.
DO NOT
operate near electrical power cables, keep within national
safety limits.
THIS WORK PLATFORM IS NOT ELECTRICALLY INSULATED.
W A R N I N G
1
6
3
2
5
4