61
User Manual M70 / M80 / M90
Getting to know
U
sing the handset
This section describes the use of the phone with the default settings. If your phone was installed
and/or set up by someone else, the default settings may have been changed. Please check with that
person or company if the phone does not react as described in this manual.
M
aking calls
See "Alphanumeric keys" on page 31 for information on input modes and entering letters,
numerals, and special characters.
Selecting an identity for the outgoing call
The identity (extension) displayed on the idle screen of your handset (Fig. 1) is the default identity for
outgoing calls. For more information, see "Line" on page 51. If the handset has more identities and
you do not want to use the one on the display for the next outgoing call, you can select a different one
just for this call without changing the settings.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
1. Before pressing the green key to dial a number, press the function key underneath
Line
.
◦
When dialing manually, you can select a different outgoing identity at any time while or after
entering the digits on the keypad (Fig. 2).
◦
When calling a number from the global phonebook, select the name, then press the function
key underneath
Line
(Fig. 3).
2. Select the identity to be used for the next outgoing call with the up/down arrows on the navigation
key and press the function key underneath
Select
(Fig. 4).
◦
If dialing manually: The display will return to the
Enter number
screen where you can enter
any remaining digits, if necessary (Fig. 2).
◦
If dialing from the central directory: The display will return to the directory (Fig. 3).
3. Press the green key
to dial.
